Filter
Top Products
... the slide control for the grinder
setting will not move.
^
Close the machine door and
dispense a cup of espresso coffee.
The grinder setting slide control will
now move.
... "Fault - 1" to "Fault - 4" or "Fault -
80" to "Fault - 83" appears in the
display.
^
Switch off the machine using the
On/Off sensor and wait for one hour
before switching it on again.
If the fault message appears in the
display again, contact the Miele Service
Department.
... the message "Fault - 28" appears
in the display.
Enough ground coffee for one portion,
i.e. a level coffeespoonful of ground
coffee, passes through the ground
coffee chute. If there is too much
ground coffee, the machine is unable to
process it so that it can be emptied into
the waste container, and a fault
message appears in the display.
^
Switch the machine off and then back
on again.
... the message "Fault - 73" appears
in the display.
The brew unit cannot be positioned
correctly.
^
Take the brew unit out of the machine
and clean it thoroughly (see
"Cleaning and care - Brew unit").
^
Push the coffee ejector of the brew
unit into the correct position.
^
Set the brew unit to one side and
replace the waste container and the
water container in the machine.
^ Close the door.
The brew unit motor will now move
into the correct position.
^ When "Fit the brew unit" appears,
open the door and replace all the
parts in the machine.
^ Close the door.
If the fault message continues to
appear in the display, please call the
Miele Service department, quoting the
fault code.
... the message "Fault - 74" or "Fault -
77" appears in the display.
^
Switch the machine off and then back
on again.
If the fault message appears in the
display again, contact the Miele Service
Department.
Problem solving guide
69