Filter
Top Products
Cleaning the grease filters
^
By hand: use a scrub brush with a
solution of warm water and mild
detergent.
Do not use the pure detergent,
aggressive all purpose cleaners,
oven sprays, abrasive cleaning
agents or limescale removers. They
could destroy the filter.
^
In a dishwasher: place the filter
vertically in the lower basket, making
sure that the spray arm is not
blocked.
Use a hot temperature program,
e.g. "Heavy Soil" or "Pots and pans".
Use the recommended amount of
dishwasher detergent. Overuse could
destroy the filter.
Depending on the detergent,
cleaning the grease filter in a
dishwasher may cause permanent
discoloration of the filter surface.
Performance of the filter will not be
affected by this discoloration.
^
After cleaning, the filters can be
placed on a towel to air dry.
^
While the filters are removed, clean
any dirt or grease from the interior
casing to prevent the risk of fire.
^
When putting the grease filter back
make sure that the locking clip is
facing the cooking surface.
^
If the filter is incorrectly installed,
insert a small screwdriver into the slit
along its edge to disengage it from
the casing.
After cleaning and returning the grease
filters the timer must be reset.
^ While the fan is on, press and hold
the grease filter control until only the
first "-/+" indicator is flashing.
^ The second grease filters must also
be reset in the same way, even if the
timer has not yet reached its
maximum.
Cleaning and care
18