Filter
Top Products
a Recirculation grille
(only for recirculation mode)
b Exhaust connection
c Adjustable bracket
d Vapour canopy
to which a furniture door front is fitted
e Charcoal filter
(extra accessory available to order
for recirculation mode)
f Hob lighting
g Grease filters
h Control panel
Operation
To switch on the fan
^ Open the vapour canopy.
The fan will come on at power level 2.
^ Press the appropriate buttons to
select the power level required.
Depending on the intensity of the
cooking vapours, levels 1-3 are usually
sufficient for normal cooking.
Intensive setting
For short periods of cooking food with
intensive vapours and a strong aroma,
e.g. when searing meat, you may wish
to select the Intensive Setting "IS".
The cooker hood will automatically
revert to the previously selected power
level after 10 minutes.
It is advisable to run the fan for a few
minutes after cooking has finished to
neutralise any lingering odours in the
air, whether you are using air extraction
or recirculation mode.
^
To switch the fan off
– close the vapour canopy, or
– press the OFF button for longer.
To switch on the lighting
^
The lighting comes on when the
vapour canopy is opened up and
switches off when the canopy is
closed.
In the event of a power cut, the fan
and the lighting will switch off
automatically.
Once power has been restored to
the appliance, the fan will come on
at power level 2 and the lighting will
switch on again when the vapour
canopy is opened.
Guide to the appliance / Operation
11