Filter
Top Products
With air extraction:
If the on-site ventilation system does
not have a non-return flap, one of the
two non-return flaps supplied (for
C 150 mm or C 120 mm ducting) must
be fitted.
–IfC 150 mm ducting is being used,
the non-return flap should be fitted
onto the exhaust connection.
With C 120 mm ducting, first fit the
reducing collar supplied onto the
exhaust connection and then fit the
appropriate non-return flap into the
reducing collar.
^
For extraction connection, secure a
flexible ducting or an extraction pipe
to the exhaust connection using a
hose clip.
^
Proceed with the exhaust connection.
(see "Connection for air extraction").
With recirculation mode:
^
Fit the charcoal filters (see "Cleaning
and Care").
^
Finally refit the grease filters.
Installation
22