Filter
Top Products
Height adjustment
^ Using the screws at the back of the
adjustable brackets, align the cooker
hood height with that of neighbouring
units. Turn the screw
– anti-clockwise : to raise the
appliance.
– clockwise : to lower the appliance.
^ If necessary adjust the depth again.
Securing the appliance to
neighbouring wall units or fitting side
panels
^
Remove the vapour canopy.
^
Remove the grease filters.
^ Secure the cooker hood to the
neighbouring units, or fit the side
panels, using two screws each side.
For the lower screws, first remove the
screw caps, and refit them
afterwards.
^ Replace the vapour canopy.
Installation
21