Miele DG4080 Oven User Manual


 
Repairs should only be carried out by an authorized technician in accordance
with local and national safety regulations. Unauthorized repairs could cause
injury or appliance damage. The manufacturer cannot be held responsible for
unauthorized work.
The oven cannot be turned on.
Issue Fix
There is no power to the steam oven. Reset the circuit breaker if it has
tripped.
If this is not the case, disconnect the
appliance from the power supply for 1
minute.
Reconnect the power and turn the
appliance on. If it still does not heat,
contact Miele Technical Service.
The fan can still be heard after the appliance has been turned off.
Issue Fix
The appliance has a fan which removes
steam from the oven.
The fan will continue to run for a while
after the oven has been turned off.
The steam generator is difficult to insert or remove.
Issue Fix
The connection valve at the steam
connector needs to be lubricated.
Lubricate the connection valve (not the
electrical connection!) with a small
amount of the supplied silicone grease.
See "Cleaning and care - Connection
valve".
The heating phase takes an unusually long time.
Issue Fix
Check the bottom of the steam
generator. If there are calcium deposits,
check the water hardness level setting.
Set the level to the water hardness of
your area. See "Setting the water
hardness". Descale the steam oven as
described in "Descaling".
If the water hardness is set correctly or
if the problem persists, call Technical
Service.
Frequently asked questions
42