Filter
Top Products
The oven does not change from the heating to cooking phase after relocation.
Issue Fix
The oven must be reset to a new
location and/or boiling temperature of
the water.
See "Setting the altitude".
A great deal of steam comes out of the appliance while in use, or steam
comes out of unusual locations.
Issue Fix
The door is not properly closed. Close the door.
The door gasket does not fit properly. Press it on, so it evenly fits.
The door gasket is damaged. The gasket must be replaced.
If the problem persists, call Technical
Service.
A whistle sounds when the cooking is resumed.
Issue Fix
Once the door is closed pressure is
vented with a whistling sound.
This is not a fault.
The display shows a F with a number.
Issue Fix
F 20 The oven does not heat. Check if the steam generator is
inserted all the way by removing it and
inserting it again.
Turn the steam oven off and on again.
If the fault occurs again, lightly
lubricate the connection valve of the
steam generator with silicone grease,
as described in "Cleaning and care -
Connection valve".
If the problem persists, turn the
appliance off and call Technical Service.
Other fault messages Call the Miele Technical Service
Department.
Frequently asked questions
43