Filter
Top Products
Proceed as follows:
^
Wait until the appliance has cooled
down.
^
Close the door and switch on the
empty appliance.
The k symbol, the Descale programme
symbol k and a number will appear in
the programme/temperature display.
^
Press the Start/Stop button.
E00 will appear in the
programme/temperature display, the k
symbol will appear on the left hand side
and the Descale programme symbol k
will also appear.
The appliance will start to drain. Once
the draining process is complete, E01
will appear in the
programme/temperature display.
^ Fill the syringe supplied with water.
Press the nozzle into the opening on
the top left of the front of the
appliance (see arrow) and inject the
water slowly and evenly. Make sure
you keep the nozzle horizontal.
^
Now fill the syringe with the descaling
agent supplied and inject it into the
opening.
^
Then fill the syringe with water and
inject the water into the opening. This
needs to be done twice.
You will then hear a beep and E02 will
appear in the programme/temperature
display. The machine is preparing itself
for the descaling procedure.
If you do not hear the signal you
must not inject any more water into
the system!
Wait for five minutes. If the signal still
does not sound you should switch
the machine off and then back on
again (see the "Problem solving
guide").
When the appliance is ready to begin
the descaling process, a beep will
sound and E03 will appear in the
programme/temperature display.
^
Now fill the syringe with descaling
agent and inject the contents of 2 full
syringes into the opening.
^
Then fill the syringe with water and
inject the water into the opening. This
needs to be done twice.
You will then hear a beep and E02 will
appear in the programme/temperature
display. A descaling duration of 30
minutes will appear in the time display.
This time cannot be altered.
Cleaning and care
48