Filter
Top Products
Clock format
The request to select a Clock format will appear. The default
setting for the clock is 24 h.
^
Touch the ; or ? sensor until the clock format you want
appears highlighted in the display.
Confirm with "OK".
Setting the time of day
You will then be requested to enter the Time of day. The hour
is highlighted.
^
Use the ; or ? sensor to set the hour you want and
confirm with "OK".
The minutes are highlighted.
^ Use the ; or ? sensors to set the minutes you want and
confirm with "OK".
Time of day display
You will then be asked if you want the display to always show
the time:
On = the display will always show the time of day
On for 60 seconds = the display will show the time for 60
seconds after the appliance is switched off
Do not display = the display will not show the time
^
Use the ; or ? sensor to select the setting you want and
confirm with "OK".
After you have confirmed your selection with "OK", the display
will show a message to tell you that setting up for the first time
has been successfully completed.
^
Confirm with "OK".
Your steam oven is now ready for use.
Before using for the first time
20