Filter
Top Products
Pre-heat
This function can be activated or deactivated.
Recommended temperatures
If you frequently change a recommended temperature it may
be a good idea to change it permanently. You can change
the temperatures within the permitted range.
Water hardness
The steam oven is set at the factory to water hardness setting
IV (Very hard 4). You can set the steam oven for the water
hardness level in your area.
You can use the test strip supplied to check the water
hardness level, or your local water supplier will be able to
advise you on the water hardness of your area.
The water hardness is shown as settings I to IV equivalent to
the German scale 1 to >21 °dH (0.2 >3.8 mmol/l).
Hardness level Hardness range Setting
I 1-7 °dH
(0.2-1.3 mmol/l)
Soft 1
II 8-14 °dH
(1.4-2.5 mmol/l)
Medium 2
III 15-21 °dH
(2.7-3.8 mmol/l)
Hard 3
IV >21 °dH (above
3.8 mmol/l)
Very hard 4
Display
The contrast and brightness can be adjusted.
Volume
The volume of the buzzer and keypad tone can be altered.
Settings
34