Filter
Top Products
Appliance door, side panels
Remove any soiling from the
appliance door and side panels im
-
mediately.
If this is not done, it might become
impossible to remove and could
cause the surface to alter or
discolour.
All surfaces are susceptible to
scratching.
Contact with unsuitable cleaning
agents can alter or discolour the
surfaces.
^ The surfaces should be cleaned
using a solution of hot water and a
little washing-up liquid applied with a
soft sponge. They can also be
cleaned with a damp microfibre cloth
(without using any cleaning agent).
^ After cleaning, wipe with a damp
cloth and dry with a soft cloth.
Stainless steel appliance door:
The appliance door has a high quality,
special finish which is resistant to
soiling and is very easy to clean.
Do not use the following to
clean/condition the door
– stainless steel cleaning agent:
this will damage the surface.
– Miele stainless steel conditioning
agent:
this will cause noticeable smearing.
Ventilation gaps
^ The ventilation gaps should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.
Door seal
Do not use any oils or grease on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
^
The door seal should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
Cleaning and care
25