Filter
Top Products
^ Remove cap h from the bearing
bush in the door and refit on the
opposite side.
^
Using a screwdriver, remove spring
clamp i from underneath the door
and fit it on the opposite side.
^
Pull hinge pin a together with disc b
and adjustable foot c upwards and
off.
^ Remove cover cap d.
^ Undo screws e and take hinge plate
f off.
^ Undo the screw of hinge part g on
hinge plate f slightly. Fit it into the
hole opposite in hinge plate f and
tighten up the screw.
^ Refit cover cap d in the other hole.
^
Remove cover i.
^
Unscrew and remove screw h and
refit it into the outer hole of the
opposite side.
^
Turn cover i through 180°, and fit it
into the holes on the other side.
Changing the door hinging
43