Filter
Top Products
Installation steps at the front of the
appliances
^
Screw in middle feet c completely.
They must not come in contact with
the floor.
^ Align the joined appliances using
outer feet b.
^
Align the feet using the spanner
supplied.
^
Position the front of the long stainless
steel trim l in the gap, making sure
that it is located above connecting
panel g.
Pressing both ridges along the trim
together as you do so makes it
easier to fit the trim into the gap.
^ Carefully work stainless steel trim l
into the gap. Use a soft cloth to do
this to avoid denting the trim.
^ Carefully remove the protective foil
from the stainless steel trim.
Installing in a side-by-side combination
39