Filter
Top Products
Ventilation
Air at the back of the appliance gets
warm. To ensure sufficient ventilation,
the air inlet and outlet must not be
covered or blocked in any way. They
should be dusted on a regular basis.
Installation
^
Remove the cable clip from the back
of the appliance.
^
Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
^ Carefully push the appliance into
position with the back against the
wall.
Aligning the appliance
^
To align the appliance, adjust the feet
using the spanner supplied.
^ If necessary, also align the two rear
adjusting devices a using socket
wrench b.
Turn the adjusting device clockwise
to raise the appliance up at the back.
Installation
38