Filter
Top Products
^
Then separate retainer f from cover
e, by pushing it slightly to the left
and then pulling the cover forwards
and off.
^
Rotate retainer f by 180°.
^
Then fit cover e from the front over
retainer f, and slide it over to the
right. The writing must be visible.
^
Remove cover g, rotate it by 180°
and fit it to the opposite side.
^
Then fit cover e together with
retainer f on the opposite side.
^
Remove cap h from the hinge bush
in the door and refit on the opposite
side.
^
Remove cover a by pulling it
forwards.
^
Pull cover b off.
^ With the help of another person,
carefully tip the appliance back and
pull hinge pin c downwards to
remove.
^ Take care not to lose hinge bush d.
^ Undo screws e and take hinge plate
f off.
^ Remove cover g and refit on the
opposite side.
^
Refit hinge plate f onto the other
side using the 2 outer screws. To
make it possible to align the door
later, do not replace the centre
screw at this stage.
Changing the door hinging
47