Filter
Top Products
Issue Possible fault Solution
Dishes are not dry,
glasses and cutlery
are spotted?
The rinse aid setting may be
too low or the rinse aid
reservoir is empty.
Increase the dosage, refill
the reservoir or switch the
rinse aid product when
refilling, see "Before using
for the first time".
Dishes were taken out too
soon.
Leave dishes in longer, see
"Use".
"2 in 1" or "3 in 1" products
were used. These products
have a low drying effect.
Set the detergent type to
"Powder" and insert rinse
aid. See "Settings J -
Detergent".
The detergent "2 in 1" or
"3 in 1" is set, but another
product was used.
Select the detergent setting
to the detergent used. See
"Settings J - Detergent".
White residue is
visible on cutlery
and dishes,
clouding occurs on
glassware and film
can be wiped off.
Not enough rinse aid was
used.
Increase the dosage, see
"Before using for the first
time".
The salt container is empty. Increase the dosage, see
"Before using for the first
time".
The salt container lid was
not screwed on properly.
Reseat and screw the lid on
firmly.
Unsuitable "2 in 1" or "3 in 1"
products were used.
Use a different detergent.
Try using normal tabs or
normal powder detergent.
The automatic water
softener unit is defective.
Contact Miele Technical
Service.
Frequently asked questions
55