Filter
Top Products
You can now select the detergent used.
Available selections are: Powder, Gel,
"2 in 1" and "3 in 1".
See "Settings J - Detergent".
Starting a program
^ Select
Start.
The display shows
Close the door.
To select another program or to add
options, select
Back and cancel the
program with
Cancellation.
^ Close the door.
The optical interface lights to indicate
that a program is running.
Cancel a program only in the first
5 minutes. Otherwise important
program steps (e.g. the water
softening) could be interrupted.
Time display
Before the program starts, the time
display shows the running time of the
selected program in hours and minutes.
During the running program the
remaining time shows in the time
display.
The running time for the same program
may vary depending on the intake
water temperature, load size and
soiling.
When a program is selected for the first
time, a time is shown which equals an
average program running time with
cold water.
The time values in the program guide
correspond to the program running
times with standard loads and
temperatures.
Each time a program is run the
electronic adjusts the program running
time according to the water intake
temperature and load size.
Use
35