Filter
Top Products
Issue Possible fault Solution
The optical interface
flashes fast.
The program "Energy
Saver" displays the
fault:
Water intake temp. too
low
The intake water does
not have a minimum
temperature of 115°F
(45°C). See "Plumbing -
Connection to the water
supply".
– Restart the program.
– If the fault is displayed
again, use a different
program.
The optical interface
flashes fast, the
buzzer sounds and the
display shows:
Drain fault FXX
Before fixing the fault:
– Turn the dishwasher off o.
Fault F11:
Fault in the water drain.
There might be water in
the wash cabinet.
– Clean the triple filter.
– Clean the drain pump and
the non-return valve.
See "User Maintenance
Instructions" for more
information on the above.
– Remove any kinks in the
drain hose.
Frequently asked questions
52