Filter
Top Products
Factory defaults
If you have changed any settings, you
can reset them to the factory defaults.
^ Press the K button to turn the
dishwasher off.
^ Press and hold the Start/Stop button
and simultaneously turn the
dishwasher on using the K button.
Keep the Start/Stop button pressed
for at least four seconds until the
"Start/Stop" indicator light comes on.
If it does not come on, start over.
^ Press the Delay start button 12 times.
The Delay start indicator light shows 1
long flash and 2 short flashes in
intervals.
The flashing in the time display shows
whether a setting is different from the
default setting.
– "p1": all values are set to the default
settings
– "p0": at least one setting has been
changed.
^ Press the Start/Stop button to reset
the dishwasher to the default
settings.
The setting is immediately saved.
^ Press the K button to turn the
dishwasher off.
Additional options
38