Filter
Top Products
Cleaning the control panel
^
Only clean the control panel with a
damp cloth.
,
Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.
,
Do not use abrasive, glass or all
purpose cleaners. They will damage
the surface.
Cleaning the exterior
,
Never use abrasive cleaners,
scouring pads, steel wool or caustic
(oven) cleaners on the dishwasher.
They will damage the surface.
Plastic
All plastic surfaces can be cleaned with
warm water and liquid dish soap
applied with a soft sponge.
Wipe dry using a soft cloth.
Stainless steel
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner.
To help prevent resoiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
Stainless steel colored controls
These controls can be cleaned with
warm water and liquid dish soap.
These controls may become discolored
or damaged if not cleaned regularly.
Do not use a stainless steel cleaner on
the knobs or buttons.
Wood
Panels made from wood should be
cleaned using a soft damp cloth and an
appropriate wood cleaner.
Cleaning and Care
48