Filter
Top Products
Adapting the height of the decor
panel supplied
^
Mark the measurement X on the left
and right hand side of the decor
panel and on the decor frame strips.
^
Take off and shorten the decor frame
strips, the decor panel and the filler
card (see Step 4).
Calculating the height of a new decor
panel
You can substitute the decor panel
supplied with the dishwasher with a
panel to match your kitchen decor.
The dimensions for the new panel must
be as follows:
Width:
587 mm
Thickness:
minimum 1 mm and maximum 4 mm.
The filler card fitted behind the decor
panel supplied with the machine is not
required for new panels if they are
2 mm or more in thickness.
Height:
604 mm less dimension X mm
^
Mark dimension X on the left and
right hand side of the decor frame
strips.
^
Take off the decor frame strips, the
decor panel and the filler card, and
shorten the decor frame strips, and
the filler card (if used). See Step 4.
4.Matching the plinth facing of
a kitchen run
^ Pull the dishwasher out of its recess
enough to allow easy access to the
front panel fixing screws on either
side of the door.
^ Loosen and remove the fixing screws
and push the side decor frame strips
downwards until they are free of the
dishwasher outer door panel and can
be removed.
Installing built-under "U" model dishwashers
28