Filter
Top Products
What if ... Possible fault Fix
dishes are not dry,
glasses and cutlery are
spotted?
The rinse aid setting may
be too low, or the rinse aid
reservoir is empty.
Increase the dosage or
refill the reservoir, see "Be
-
fore using for the first
time".
Dishes were taken out too
soon.
Leave dishes in longer.
white residue is visible
on cutlery and dishes,
clouding occurs on
glassware and film can
be wiped off?
Not enough rinse aid was
used.
Increase the dosage, see
"Before using for the first
time".
The salt reservoir is
empty.
Add reactivation salt, see
"Before using for the first
time".
The salt reservoir cap was
not correctly screwed on.
Reseat it making sure it
screws back on correctly.
The incorrect detergent
was used.
Only use powder deter-
gent or tablets.
there are smears on
glasses and cutlery, blu-
ish sheen on the surface
of glasses and film can
be wiped off?
The rinse aid dosage is
set too high.
Reduce the dosage, see
"Before using for the first
time".
Frequently asked questions
40