Filter
Top Products
Procedure... lights flashes
The correct water hardness is now programmed:
^
Turn off the dishwasher with the “Off” (o) button.
To change the water hardness:
^
Press the button that corresponds to the water hard
-
ness of your area. As long as the button is held in the
indicator will remain lit.
1 - 5 gr/gal ( 20 - 90 ppm): button
b
6 - 7 gr/gal (110 - 130 ppm): button c
8 gr/gal (140 ppm): button d
9 - 11 gr/gal (160 - 200 ppm): button e
12 - 14 gr/gal (220 - 250 ppm): button f
On + b
On + c
On + d
On + e
On + f
Salt
Salt
Salt
Salt
Salt
15 - 70 gr/gal (270 -1260 ppm): see the following page
^ Release the button. On Salt +
c
Other indicators may light depending on which features
have been selected:
^ Press g button. On + g Salt
^ Press the
g button once more. On Salt + g
^ Turn the dishwasher off with the “Off” (o) button.
The programmed water hardness level is now stored in
the program memory.
^
To check the setting of the water hardness selector
(see “Setting the water hardness level in the wash
cabinet”).
Before using for the first time
15