Filter
Top Products
Increasing the water intake time
Procedure... lights flashes
^
Open the door.
^
Turn off the dishwasher with the “Off” button (o).
^
Press buttons
b and d while simultaneously
turning on the dishwasher with the “On” button (
g) .
On Salt
^
Release buttons
b and d. On Salt + c
Note: If any other indicator lights flash, repeat
the procedure from the beginning.
The following indicators may also be lit, if:
– Rinse aid has not been added or needs to be
refilled,
Rinse aid
– Heated drying is deactivated (see “Additional
features”)
b
– The water intake time has been increased
(see “Increasing the water intake time”)
d
–
The End of program buzzer is deactivated
(see “Additional features”).
e
50
Solving problems