Filter
Top Products
What if … Possible fault Fix
the "Drain" indicator
flashes and the program
stops?
The triple filter in the wash
cabinet is clogged.
Clean the filter, see main
-
tenance instructions.
The drain pump or the
non-return valve may be
blocked.
Clean the drain pump and
the non-return valve, see
maintenance instructions.
The drain hose is kinked. Remove the kink.
the "End", "Start/Stop"
and "Top Solo" indica
-
tors flash at the same
time at the end of a pro
-
gram?
There may be a technical
fault.
–
Press the "Start/Stop"
button.
–
Turn off the dishwasher.
A few seconds later:
–
Turn the dishwasher on.
–
Select the desired pro
-
gram.
– Press the "Start/Stop"
button.
If the indicators flash
again, there is a technical
problem.
– Call the Miele Technical
Service Department.
Frequently asked questions
35