Filter
Top Products
The appliance must not be operated
until it has been correctly installed in
its housing unit. Otherwise it poses
an electric shock hazard.
Important:
Do not fit insulation material inside
housing unit. This would hinder the
intake of air to the appliance.
Important:
Remove the protective cork spacers
from the sides of the cooker before
installation.
Before connecting the appliance to
the mains you must disconnect the
power supply to the cooker point.
Follow the connection diagram
supplied with the cooker.
^
Connect the cooker cable to the
isolator.
^
Align the cooker in front of the base
unit.
^
Connect the hob plugs to the socket
on the cooker.
^ Push the appliance into the base unit
and align it.
^
Open the appliance door, and use
two screws to secure it to the side
walls of the housing unit through the
holes in the trim.
^
Reconnect the power supply to the
isolator switch.
Installing the cooker
62