Filter
Top Products
Electrical connection AUS, NZ
All electrical work should be under-
taken by a competent person in
strict accordance with national and
local safety regulations.
The voltage and rated load are given
on the data plate, visible when the
oven door is open. Please ensure that
these match the household mains sup-
ply. Please quote these data, and the
model and serial number when contact-
ing the Miele Service dept.
Connection of this appliance should be
made via a suitable isolator which com-
plies with national and local regula-
tions, and which is accessible after the
appliance has been built in.
WARNING
THIS APPLIANCE MUST BE
EARTHED.
Test marks . . . . . . . . . . Electrical Safety
. . . . . . . . . . . . . . . . . . . . . . C-Tick Mark
Electrically suppressed
according to. . . . . . . . . . . AS/NZS 1044
AUS
Wall oven
The wall oven is suitable for connection
to an a.c. single phase 240 V, 50 Hz
electricity supply.
The fuse rating is 16 A.
NZ
Wall oven
The wall oven is suitable for connection
to an a.c. single phase 230 V, 50 Hz
electricity supply.
The fuse rating is 16 A.
Electrical connection AUS, NZ
74