Triangle V in the display
When the triangle lights up V below a
symbol in the display, the
corresponding function is indicated.
If the triangle flashes V below a
symbol, the function has been selected
and can be changed.
The triangle V flashes for about
5 seconds.
The setting can be changed using
V or W only while it is flashing.
If this entry time elapses, you must
once again call up the desired
symbol with "OK".
325
6 m TS
V
When one of the touch controls is
pressed, depending on the position of
the function selector, the symbols of
the settings that can be entered light
up in the display.
^
Press V or W until the triangle V
stops underneath the desired
symbol.
^
Select "OK" to confirm.
The triangle V flashes.
Each time V or W is pressed, the
following changes are made:
–
Time T Microwave (Solo) in
10 -second increments,
–
Time T in 1 -minute increments,
–
End S in 1 -minute increments,
–
Short time N in 5 -second
increments, followed by 1-minute
increments.
Press and hold the touch controls to
quickly move through the display.
Guide to the display
12