Solo functions
Functions without microwave
^
Place food in the oven.
^
Select the desired function
(e.g., Convection Bake).
The display will show:
3
325
3 m
V
– the default temperature "325",
– Temperature indicator
3,
– the triangle V below the 6 symbol.
The heating, lighting and cooling fan
turn on simultaneously.
Once the selected temperature is
reached, the temperature indicator
goes out and a signal sounds.
^
After the cooking process, turn the
function selector to "Off" and remove
the food from the oven.
Cooling fan
The cooling fan will continue running for
some time so that moisture cannot
condense in or around the oven.
It will turn off automatically once the
oven has cooled down to a factory set
temperature.
Temperature indicator 3
In addition to the temperature, the
Temperature indicator
3 also
appears in the display. It will always
light when the oven heating is turned
on.
When the selected temperature is
reached,
–
the oven temperature goes out.
–
the temperature indicator
3 goes
out.
–
if the signal tone is turned on, a
signal sounds (see "Settings").
Should the temperature fall below the
value set, the oven heating and
temperature indicator will turn on again.
Rapid Heat
Default temperature ....325°F (160°C)
Rapid Heat can be used to pre-heat the
oven.
^
Select "Rapid Heat".
^
Set the required temperature using
the temperature selector.
Oven heating begins.
^
After the temperature indicator
3
goes out and the signal sounds,
select the desired function and place
the food in the oven.
Using the oven
26