Filter
Top Products
Whilst triangle V is flashing, use the
O or P buttons immediately to make
any changes to the setting selected:
–
The P button increases the value
shown.
–
The O button reduces the value
shown.
Triangle V will flash for approx.
5 seconds.
Settings can only be changed using
the O or P buttons while it is
flashing.
If this period has elapsed you, will
need to call up the required symbol
again by pressing the Q button.
Each press on the O or P button alters
the time in one-minute steps.
Holding the button pressed in for
longer, speeds up the change in the
display.
Setting the time of day
When the appliance is first
connected to the power supply, or
after a power cut, "I2:00" will flash in
the display.
The time of day can only be entered
if the function selector is at "0".
^
Turn the function selector to "0".
lm
V
^ Press the Q button repeatedly until
triangle V is underneath the m
symbol in the display.
^ Whilst triangle V is flashing, use the
O or P button to enter the hour and
confirm by pressing the Q button.
The minutes and triangle V will flash.
^
Now use the O or P button to enter
the minutes, and confirm by pressing
the Q button.
As soon as the m symbol goes out, the
time set is saved and the colon starts to
flash.
Clock/Timer
24