Filter
Top Products
If the oven is to be installed in a
base unit which has both a back
panel and an interim shelf, a
ventilation cut-out will need to be
made in either the back panel or the
interim shelf to ensure adequate
ventilation is provided for the
appliance.
The ventilation cut-out must be at
least 150 cm
2
. It does not have to be
any specific shape.
Do not fit insulation material inside
the housing unit. This would hinder
the intake of air to cool the
appliance.
Turn off the mains electricity supply
to the isolator.
^
Connect the mains cable from the
oven to the isolator.
^
Place the oven into the oven housing
unit as far as the oven trim and align
it.
^
Open the oven door and using two
screws secure the oven to the side
walls of the housing unit through the
holes in the oven trim.
^
Reconnect the electricity supply to
the isolator.
The appliance must only be
operated when it has been built in.
Otherwise it poses an electric shock
hazard.
Installing the oven
70