The oven must be built in before it
can be used. Otherwise it poses an
electric shock hazard.
Important: Do not fit insulation
material inside housing unit. This
would hinder the intake of air to the
appliance.
Before connecting the appliance to
the mains you must disconnect the
power supply to the cooker point.
Follow the connection diagram
supplied with the cooker.
^
Connect the cooker cable to the
isolator.
^
Align the cooker in front of the base
unit.
^
Connect the hob plugs to the socket
on the cooker.
^ Push the appliance into the base unit
and align it.
^
Open the appliance door, and use
two screws to secure it to the side
walls of the housing unit through the
holes in the trim.
^
Reconnect the power supply to the
isolator switch.
Installing the cooker
73