Filter
Top Products
What if the oven does not heat?
Possible fault Solution
The circuit breaker has tripped. Check the breaker.
The delay start has been set. Cancel the delay start.
The temperature has not been set. Set a temperature.
Why is a noise heard after turning the oven off?
This is normal. The fan will continue to run for a short time to cool the oven. When
the oven has cooled sufficiently, the fan will turn off automatically.
Why is the display dark when the oven is first turned on?
Possible fault Solution
The clock display has been turned off. Turn the display on. See "Settings" -
"Time of day display (PI)".
What if there has been a power cut and instead of the time of day, "I2:00"
and triangle V underneath the m symbol are flashing in the clock/timer
display
Possible fault Solution
All pre-set times have been deleted
because of the power cut.
Enter the time of day again, and any
other pre-set data.
What if cakes and cookies are not cooked enough?
Possible fault Solution
The grease filter was not removed. If the grease filter is not removed,
increase baking by 10 to 15 minutes.
Why is there uneven browning?
Possible fault Solution
Oven not preheated. Allow the oven to preheat.
Oven temperature too high. Lower the oven temperature.
Grease filter was not removed. Remove the grease filter next time.
Shiny or thin pans were used. Use dark, matte finish pans.
Frequently asked questions
42