Filter
Top Products
Sequence of the cooking programme
when using Automatic switch-off
The following will appear in the display:
Before the programme starts
–
The cooking function and selected
temperature
–
"Start at" and the start time
After the programme has started
–
The heating-up phase until the set
temperature is reached
–
Once this temperature is reached, a
tone will sound (provided this is
activated - see "Settings - Volume -
Buzzer tones").
After the heating-up phase
– The "Time left" counting down can be
followed in the display,
Shortly before the end of the
programme
– The oven heating switches off.
– The cooking programme continues
using residual heat. The residual
heat in the oven is sufficient to
complete the cooking process.
–
"Use residual heat" will show in the
display.
–
The cooling fan continues to run, as
does the hot air fan if a "Fan" setting
has been chosen.
At the end of the cooking programme
–
The hot air fan switches off,
depending on the cooking function
being used.
–
The "Prog. finished" message will
appear in the display.
–
A tone will sound (provided this is
activated - see "Settings - Volume -
Buzzer tones").
After the programme has finished
–
The cooling fan will continue to run
for a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the
control panel or in the oven housing
unit.
The fan is temperature controlled
and will switch off automatically. You
can change the default setting for
this (see "Settings - Cooling fan
run-on").
–
To save energy, the oven will switch
off automatically if it is not used
again within a certain time.
The timing depends on the settings
selected (cooking function,
temperature, duration).
Changing or deleting an entered
cooking time
^ Touch the OK sensor.
^ Select "Duration" with the OK sensor.
^ Use the ? sensor to set the time to
"-:- -".
If there is a power cut, all data entered
will be deleted.
More about manual operation
32