Filter
Top Products
,
The appliance must not be
operated until it has been correctly
installed in its housing unit.
Otherwise it poses an electric shock
hazard.
To ensure adequate ventilation to
the oven once installed: do not fit
a rear panel into the housing unit.
– make sure that the shelf on
which the appliance is placed
does not touch the wall.
– do not fit insulation material
inside the housing unit.
When installing the appliance do not
lift it up by the door handle as this
can damage the door.
The following parts are supplied for
installing the oven:
,
The example below is for
installing a left-hand hinged oven.
Reverse the procedure for a
right-hand hinged oven.
^ Secure bracket a using screw b in
the position shown inside the housing
unit.
Installing the oven
81