Filter
Top Products
Manual operation
If you do not want to use an Automatic
programme you can enter the settings
for a cooking programme manually.
^
Place the food in the oven.
^
Switch the oven on with the K
sensor.
^
Select the required function and set
the temperature.
The oven will start heating, and the
cooling fans will switch on.
At the end of the cooking programme:
^ Switch the oven off and remove the
food.
Cooling fans
The cooling fans will continue to run for
a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the control
panel or in the oven housing unit.
The fans are temperature controlled,
and will switch off automatically.
You can change this standard default
setting, see "Settings - Cooling fan run-
on".
Change
Selecting "Change" brings up all the
options which can be changed, e.g. the
selected temperature.
Selecting a function
^
Switch the oven on.
^
Select the function required.
After selecting an oven function,
options which can be entered or
changed for the cooking programme
will appear in the display, e.g.:
ß Temperature
ß Duration
ß Start time
ß Finish
ß Heating-up phase
(only with Fan plus, Auto roast and
Conventional heat)
ß Moisture reduction
ß Change function
Operation
29