Filter
Top Products
Time left display
After a certain time, the estimated time
remaining (i.e. the time left to run),
appears in the oven display.
The actual core temperature is no
longer displayed and cannot be called
up.
The time remaining is calculated from
the oven temperature selected, the
required core temperature and the
pattern of the increasing core
temperature.
The time remaining first shown is an
estimate. As the cooking process
continues the time remaining is revised
continuously, and a more accurate
revised figure shown.
If, while the time remaining is showing
in the display:
– the oven or core temperature is
altered,
– or a different oven function is
chosen,
–
or the door is left open for a
particular length of time
all the time remaining information will
be cancelled and the actual core
temperature will re-appear in the
display. The time left display will
reappear after a while.
If the door is opened during an auto
-
matic programme the time remaining
will continue to show in the display.
Making use of residual heat
The heating in the oven switches off
shortly before the end of the cooking
programme. The residual heat in the
oven is sufficient to complete the
cooking process.
Using the residual heat in the oven
saves energy.
"Energy save phase" will appear in the
display to show that the oven is in
Energy save mode. The time remaining
will continue to be visible in the display.
The cooling fans continue to run, as do
the hot air fans if a "fan" setting has
been chosen.
When the core temperature selected
has been reached,
– the oven switches off automatically.
– the message "Programme finished"
and the
O symbol appear in the
display.
–
a buzzer will sound.
If the food is not yet cooked sufficiently,
insert the food probe into another place
and repeat the programme.
Food probe
38