Filter
Top Products
Frequently Asked Questions
51
Problem Possible cause and solution
The Intake/Drain and
Rinse Aid indicator
lights are flashing at the
same time.
Fault number ap‐
pears in the display.
There may be a technical fault.
Turn the dishwasher off with the button.
Turn the dishwasher back on after a few seconds.
Select the desired program.
Press the Start button.
If the indicator lights flash again, there is a technical
fault.
Contact Miele Service.
Fault :
The drain pump is still
running, even with the
door open.
The WaterProof System has reacted.
Turn off the water supply.
Contact Miele Service.
Fault : A fault has occurred in the circulation pump.
Turn the dishwasher off for at least 30 seconds
with the button.
Turn the dishwasher back on.
If the fault message appears again, there is a techni‐
cal fault.
Contact Miele Service.