Filter
Top Products
Before using for the first time
Important:
To ensure the correct functioning of
the appliance, let it stand for 1½ to
2 hours after transporting it to its final
location before connecting it to the
mains.
Protective foil
The stainless steel trim to the interior
shelves and the door shelves has a
layer of protective foil to prevent
damage during transportation.
On stainless steel appliances, the outer
surfaces are also covered with
protective foil.
^ Do not remove the foil until the
appliance has been positioned in its
final location.
Cleaning and care
^ Treat the stainless steel trim to the
interior shelves and the door shelves
with the Miele stainless steel
conditioner supplied as soon as you
have removed the foil.
^
On stainless steel appliances also
treat the side panels with the Miele
stainless steel conditioning agent
supplied as soon as you have
removed the protective foil.
The appliance doors have a special
finish which is resistant to soiling. Do
not use Miele stainless steel
conditioner on the appliance door.
Important. Each time it is used, the
Miele stainless steel conditioning
agent forms a water and dirt repellent
protective coating.
^
Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing up liquid, and then
dry with a soft cloth.
Active charcoal filters
(Active AirClean filters)
^
Place the active charcoal filters
supplied inside the holder, and place
the holder on one of the shelves
inside the refrigerator (see "Active
charcoal filters").
Switching on and off
13