Filter
Top Products
^ Plug any holes left in the appliance
door with the enclosed stoppers d.
^ Screw the four adjusting bolts b into
the appliance door until a resistance
is felt.
^ Fit the furniture door onto the
adjusting bolts by the fixing brackets
a, the adjusting bolts slot through
the long holes in the fixing brackets.
^
Turn the upper adjusting bolts out so
that a gap of 9 mm is created
between the appliance door and the
lower edge of the fixing bracket (see
small illustration X).
^
Turn the lower adjusting bolts out so
that locking nuts c can be fitted.
^
Tighten locking nuts c on the lower
and upper adjusting bolts a little.
Aligning the furniture door
^ Align the furniture door with
neighbouring furniture doors:
– Height adjustment Y is made by
turning the upper and lower
adjusting bolts. A maximum
adjustment of +/- 3.5 mm can be
made.
–
Side adjustments X are made by
moving the furniture door to the left
or right. This is done using the long
slots in the upper fixing bracket. A
maximum adjustment of +/- 3 mm
can be made.
After aligning the door tighten the
locking nuts on the upper adjusting
bolts.
Building in the appliance
34