Filter
Top Products
^
Close the appliance door.
Fitting the furniture door
^ A gap of 8 mm must be set between
the appliance door and the fixing
bracket a.
^ Push fitting aids d up to the height of
the furniture door: The lower edge "X"
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted, see - on
the diagram.
^
Undo nuts b, and take fixing bracket
c off together with the fitting aids.
^ Using a pencil, mark a line down the
centre of the inside of the furniture
door.
^ Using fitting aids a hang the fixing
bracket on the inside side of the
furniture door. Align the fixing bracket
centrally.
^ Attach the fixing bracket securely
using at least 6 short 4 x 14 mm chip
board screws b. (On cassette doors
only use 4 screws on the edges).
^
Pull the fitting aids upwards to
remove them c.
^
Turn them round and insert them right
into the middle slot on fixing
bracket d.
Building in the appliance
30