Filter
Top Products
^ Hang the furniture door onto adjust-
ing bolts a.
^ Loosely attach the nuts b on the
adjusting bolts.
^ Shut the door and check the distance
between the door and neighbouring
furniture doors.
^ Align to match neighbouring doors if
necessary:
Side adjustments "X" are made by
sliding the furniture door, and height
adjustments "Y" are made by turning
the adjusting bolts a with a screw
-
driver.
^
Tighten the nuts b slightly.
^ Use fixing bracket a to attach the
appliance door to the furniture door.
– Using a screwdriver remove
cover b.
– Check that the two metal edges c
are flush (see symbol
II
).
– Drill fixing holes d and screw in the
short 4 x 14 mm chip board
screws e.
–
Align depth Z on the furniture door:
Loosen the cross-slotted screws f
at the top of the door, and loosen the
hexagon headed screw g on the fix
-
ing bracket at the bottom of the door.
By moving the furniture door create a
gap of 2 mm between the furniture
door and front edge of the niche.
Close the door and align it with
neighbouring furniture doors.
(On large or divided doors attach a
second pair of fixing brackets a in the
handle region of the door. Use the
pre-drilled holes in the appliance door.)
Building in the appliance
31