Filter
Top Products
Before using for the first time
The stainless steel trim to the interior
shelves and the door shelves have a
layer of protective foil to prevent
damage during transportation.
^
Clean the inside of the appliance and
the accessories with luke warm water
and a little washing-up liquid, and
then dry with a soft cloth.
^
Carefully remove the protective foil
from the stainless steel trim.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hours after
transporting it to its final location
before connecting it to the mains.
This is important for the correct
functioning of the appliance.
Switching on
^
Using a coin, turn the On/Off dial in a
clockwise direction away from the "0"
position until the temperature display
lights up.
Forcing it beyond its range will
damage it. Turn it only as far as it will
go, then turn it back again.
The appliance begins to cool down,
and the temperature required for the
refrigerator shows in the temperature
display. The interior light will come on
when the door is opened.
To enable the temperature to get
sufficiently cold inside the freezer, allow
the appliance to run for a few hours
before placing food in it.
Switching off
^
Using a coin, turn the On/Off dial in
an anti-clockwise direction back to
the "0" position.
The temperature display will go out and
the cooling process will be switched off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^ switch the appliance off,
^ switch off at the wall socket and
withdraw the plug,
^
defrost the freezer compartment
(depending on model),
^
clean the appliance out and
^
leave the door ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
there is a danger of mould and
odours building up inside the
appliance.
Switching on and off
15