Filter
Top Products
^
Push the appliance two-thirds of the
way into its niche.
When doing this, make sure that the
mains cable does not get trapped.
Tip to help you push it into position:
Secure a length of string to the plug to
"increase" the length of the connection
cable.
Then pull the cable by the end of the
string through the housing unit. It will
then be easier to connect once the
appliance is in the unit.
^
Remove cover b from the top corner
of the appliance.
^
Secure part c using screws d
loosely into the top left-hand side of
the appliance.
^
Remove cover e.
^
Screw in adjustable foot f
completely.
^
Screw the second adjustable foot g
right into bearing block h.
Building in the appliance
59