Filter
Top Products
^ Carefully remove the protective foil
from sealing strip i.
^ Fix sealing strip i flush with the front
of the appliance on the door opening
side.
1. Position the sealing strip flush with
the lower edge of the top fixing.
2. Stick it down along its entire
length.
Installing the appliance
^ Screw the lower fixing bracket j
using screws k loosely into the
bottom of the appliance.
^ Push the appliance into the niche:
– until the top fixing bracket c
touches the front edge of the furniture
side wall.
– until the front edge of lower
left-hand fixing bracket j and the
lower right-hand fixing bracket is
flush with the front edge of housing
unit base.
A gap of 42 mm (from the appliance
carcase to the front edge of the
furniture side walls) must be
maintained.
Building in the appliance
60