Filter
Top Products
Before using for the first time
^
Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1
1/2
and 2 hour after
transporting it to its final location
before connecting it to the mains.
Switching on
The refrigerator and freezer sections
are switched on together by pressing
the master switch on the right hand
side of the control panel.
^
Press the master switch.
Bars will flash in the temperature
display and a buzzer will sound. The
appliance starts cooling.
You can also switch the whole
appliance on by pressing the "On/Off"
button for the refrigerator section on the
left hand side of the control panel.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Switching off
^
Press the master switch.
The temperature display goes out and
the cooling process is switched off. If
this does not happen, then the safety
lock is engaged.
To switch the refrigerator section off
separately
The refrigerator section can be
switched off without having to switch off
the freezer section. This is useful e.g.
whilst on holiday.
^ Press the "On/Off" button for the
refrigerator section on the left hand
side of the control panel.
The temperature display for the
refrigerator section goes out and the
refrigerator section switches off.
To switch the refrigerator section on
again
^
Press the "On/Off" button on the left
hand side of the display again.
Bars will appear in the temperature
display for the refrigerator section.
The refrigerator section starts
cooling. The interior light will come on
when the door is opened.
Switching on and off
14