Filter
Top Products
When pressing the buttons the
following are shown in the display:
–
When first pressed: The last
temperature selected flashes.
–
Each subsequent press of the
button:
adjusts the temperature shown in
1 °C steps.
–
Keeping the button pressed in:
adjusts the temperature continually.
Approx. 5 seconds after letting go of
the button the current actual
temperature of the refrigerator or
freezer is automatically shown.
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full and for
approx. 24 hours if the appliance is
full before checking the temperature
display as it will take this long for the
display to show the accurate
temperature of the appliance. If, after
this time, the temperature is too high or
too low, you will need to adjust it again.
Temperature range
The temperature can be adjusted:
–
in the refrigerator section from 2 °C
to 11 °C
–
in the freezer section from -16 °C to
-26 °C
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.
Temperature displays
During normal operation the
temperature display shows the
temperature in the middle of the
refrigerator section and the temperature
in the warmest part of the freezer
section.
If the temperature in the appliance is
not within the range that the appliance
is able to display (i.e. if it is not between
0 °C and 19 °C in the refrigerator
section, and if the temperature in the
freezer section is above 0 °C), only a
bar will light up in the temperature
displays.
It will take between 3 and 8 hours
approximately for the appliance to
reach the required temperature. The
time it takes will depend on where the
appliance is located and the
temperature setting selected.
The correct temperature
17