Filter
Top Products
For the automatic ice cube maker to
operate, it must be connected to the
household water line.
Switching the ice cube maker
ON
^
Switch the freezer ON.
^
Open the top left drawer in the
freezer section.
^ Press the ON/OFF button, and the
indicator light will now come on.
^ Close the drawer.
The drawer must be completely shut
for ice cubes to be produced.
After the appliance is turned on for the
very first time, it can take up to 24 hours
for the first ice cubes to drop out of the
ice cube maker and collect in the
drawer. Thereafter, when the ice cube
maker is switched off and then on again
it will take a maximum of 6 hours for ice
to be produced.
To ensure that the water pipes are
thoroughly flushed through, you
must not consume the first three
batches of ice from the ice maker.
This applies not only when the
appliance is first being used after
installation, but also if it has been
out of use for a longer period of time
(for example, after being away on
holiday).
Making a large amount of ice cubes
The amount of ice cubes made
depends on the temperature in the
freezer section. The lower the
temperature, the more ice cubes are
produced within a given period of time.
Once the ice cube drawer is full, ice
cube production is automatically
halted.
If you require a large amount of ice
cubes,
^ replace the full ice cube drawer with
the drawer beside it on the right.
Once the empty drawer has been
placed in position and closed properly,
the ice cube maker will begin to
produce new ice cubes again.
Making ice cubes (may vary by model)
32