Filter
Top Products
^
After cleaning, wipe the interior and
accessories with a damp cloth, then
dry with a soft cloth. Leave the doors
open to air the appliance for a short
while.
E-Cloth
^
A microfibre "E-Cloth" is available
from the Miele Spare Parts
Department. The E-Cloth is suitable
for cleaning surfaces such as
stainless steel, glass, plastic and
chrome without the use of chemicals.
Cleaning the ice cube tray
(may vary by model)
The ice cubes are formed in a tray
before they are dropped down into the
drawer.
The tray should be cleaned regularly to
remove any stale ice or water.
^ Connect the appliance to the
electricity supply.
^
Press the On/Off button on the ice
cube maker. The indicator light will
come on.
^
Empty the ice cube drawer.
^
Press the On/Off button on the ice
cube maker and hold for approx. 10
seconds (after about 1 second the
ice cube maker will switch off and the
indicator light will go out).
The indicator lamp will flash.
^
Within the next 60 seconds, push the
ice cube drawer in as far as it will go.
The ice cube tray will then rotate into an
angled position, which makes it easier
for cleaning:
^
Wait until the ice cube tray has
completed this rotation before
continuing.
^ Now take the ice cube drawer out of
the appliance and clean it.
^ Next, clean the ice cube tray with hot
water and a bit of dishwashing liquid.
Rinse thoroughly.
^ Press the On/Off button on the ice
cube maker.
The ice cube tray will return to its
original position.
^
Now put the ice cube drawer back in
the appliance and close it.
The ice cube maker will begin to
produce ice cubes again after a
maximum of 6 hours.
If the ice cube maker has not been
used for a while, it is important to
clean the ice cube tray before using
it again.
Cleaning and care
36