Filter
Top Products
If more than one switch-off time is programmed, the shortest
time remaining will show in the display, and the indicator
lamp for that particular cooking zone will flash. All the other
indicator lamps will light up constantly. If you want to check
on the time remaining for another zone, touch the m sensor
repeatedly until the indicator lamp for the zone you require
flashes.
To change the automatic switch-off time
^
Touch the m sensor repeatedly until the indicator lamp you
require flashes.
^
Touch the - or + sensor to set the time you want.
To use both timer functions at the same time
The minute minder and automatic switch-off functions can be
used at the same time.
If you have programmed in one or more switch-off times, and
would like to use the minute minder as well:
Touch the m sensor repeatedly until the minute minder
indicator lamp flashes.
If you are using the minute minder, and would like to
programme in one or more switch-off times as well:
Touch the m sensor repeatedly until the indicator lamp for
the cooking zone you require flashes.
Shortly after the last entry, the timer display will switch to
showing the shortest time remaining.
If you want to see the time remaining for other cooking zones,
touch the m repeatedly until the relevant indicator lamp
flashes.
Starting with the shortest time remaining which is shown in
the display, all cooking zones which are switched on and the
minute minder are selected clockwise.
Timer
29